Cruise Control Cable Lash Initialization
For Harley Touring Models

1.) With the Ignition off, push the right cruise switch to RESUME and hold it there.

2.) Push the left cruise on/off button to ON.

3.) Turn on the ignition switch and crank the engine. The GREEN ENGAGED light will illuminate for three seconds and go out. When it goes out, release the RESUME switch.

4.) With the bike still running, push the right cruise switch to RESUME again and hold it while the unit pulls in the slack in the cable. When the engine revs up a bit and the green light goes out again, release the RESUME button and turn the ignition switch off.