GPS VisorsCut the glare and make your screen readable!
|
|
| Got GPS? Can't see where you're going? |
| HDFlame's Custom
GPS Visors Cut the glare and make your screen readable! |
|
Made in the U.S.A. for Garmin, Magellan, Lowrance, Nuvi, Zumo, and many others! |
|
|
| Cost for the Sun Stopper is $12.95 each (U.S. Dollars), which includes U.S. and Canada shipping, via first class mail. For other foreign orders, please e-mail Bobby at hdflame@windstream.net for a price quote. For immediate credit card or debit purchase through PayPal, you can use the cart buttons below each selection, and "Begin Checkout" at the bottom. For check or money order purchases, e-mail Bobby at the address above for an address to send payment to. |
Blocks Light From The TOP & SIDES
|
You are about to PURCHASE the
best accessory for increasing the
useability and
functionality of your GPS! (Mounting Base and GPS NOT Included in this SALE) |
|
|
Page under construction - Please bear with us until we get
more photos online. All current photos are of a Large Sun Stopper |
|
|
SLANT CUT -
Provides easier access to buttons with gloved
hands. (Designed for Motorcycle Riders) |
|
 (Photo is of a large Sun Stopper - New photos coming!) |
 |
| Small Slant Cut |
Large Slant Cut |
| Small - For GPS
Units with a width from 3 ½ to 4 ½ inches across. |
Large - For GPS Units with a width from 4
½ to 5 ½ inches across. |
| Click Here For Fitment List | |
| FULL CUT - Square ends, better glare reduction, but less access to buttons. | |
 (Photo is of a large Sun Stopper - New photos coming!) |
|
| Small Full Cut |
Large Full Cut |
| Small - For GPS
Units with a width from 3 ½ to 4 ½ inches across. |
Large - For GPS Units with a width from 4
½ to 5 ½ inches across. |
| Click Here For Fitment List | |
 |
|
|
Made From 1,000 Denier Rubber Backed Cordura With a
Special Stiffener Permanently Sewn Between The HEAVY DUTY Cordura. Unlike
others made with foam fillers, these don't sag and don't flap in the wind! Installation is simple. Just clean the surface of the GPS with a soft cloth and alcohol, then place the self adhesive, heavy duty Hook & Loop base strip along the top and sides of your GPS, and finally press the Sun Stopper into place! To remove, gently lift one end of the Sun Stopper while holding the base strip to the GPS unit. |
|
    |
|
| Made-to-order Custom sizes or styles available upon request, at additional cost. | |
 |
|
| Read what our eBay Customers have to say! | |
| Thanks for your support! | |
